Composite Surfactant Oil And Gas Production Chemicals Systems Solutions

Composite Surfactant,T-OG014

Composite Surfactant

Features and Applications

This product is mainly composed of cationic and fluorine-containing surfactants, and is mainly used in acid solutions and fracturing fluids. When added at 1% to 2% to 15% to 28% HCl and mud acid solutions, the residual acid surface tension can be reduced to below 31mN/m, which is beneficial for rapid backflow of residual acid and reduces damage to the formation. When added at 1% to 1.5% to fracturing fluids, the surface tension of the breaking fluid can be reduced to below 31mN/m.

Technical Specifications

Item                                                                         Specification

Appearance                                                        Pale yellow liquid

Density, g/cm3                                                         1.00 to 1.05

pH value                                                                       5 to 9

Surface tension, mN/m                                                ≤ 31.0

Slow-release rate (90℃), %                                          ≥ 30

Demulsification rate (90℃, 4h), %                                 ≥ 80

Solubility (diluted water, 20% hydrochloric acid) No turbidity, precipitation, or layering

Recommended Dosage

Add to acid solution or fracturing fluid and circulate evenly. The general dosage is 1% to 2%.

Product Packaging

Packed in 200 kg iron drums.Other specifications can be agreed upon in the contract. 

Transportation and Storage

During transportation, avoid rain, direct sunlight, and heat, and prevent damage to the packaging. Store in a cool, ventilated, and dry warehouse. The stacking height should not exceed two layers.